Body and cover made of die-cast aluminium that can be opened by clips without tools. Painted with polyester powders, standard grey colour RAL9006, upon request different colours in the RAL range.
SCREEN
Removable extra clear tempered glass 4mm thickness.
GASKETS
Silicone gaskets.
OUTDOOR SCREWS
External stainless steel screws. Closing clips made of painted aluminium.
LED MODULES
LED modules consisting of 12 new generation chips. Flip-chip technology with 3 mm phosphor section allowing a maximum drive current If = 2.0 A. Gold electrodes free of corrosion in sulfur atmosphere. Efficiency 160lm/W @1050mA 25°C. Useful Life 100.000h L80B20 (TM-21 Projection). Secondary optics made of stabilized PMMA. Multi-layer lighting concept in which each optic illuminates the entire road surface to ensure uniformity even when some LEDs are switched off.
POWER UNITS
Electrical components mounted on removable fixing plastic plate. Available with dimmable drivers after profile setting. Available upon request with configuration for the mounting of point-to-point remote control via radio waves with Zhaga connection.
Insulation Class II, available upon request cl. I.
Expected life of the driver at Tc = 100.000 h (failure rate 0.1% / 1000 h).
CONNECTION
Cable entry through M20 cable gland with IP68 degree of protection. Network disconnector that electrically isolates the unit when opening the cover.
OVERVOLTAGE PROTECTION
Class II standard fittings are equipped with an additional TMOV that guaratees overvoltage protection in differential mode up to 10 kV and in common mode up to 6 kV. Available upon request solutions in Class I with SPD with increased immunity degree (10kV / 10 kA).
POLE CONNECTION
Adjustable goblet in painted die-cast aluminium with 5° steps in order to allow both pole-top mounting +/-10° and side pole mounting +/-10°. Suitable for 60 mm diameter poles.
