Bent sheet steel, 0.5 mm thickness, painted with polyester powders colour standard RAL9016, very reduced thickness after treatment of pickling. Ceiling fixing system driven by special bosses, power cable entry hole protected by a special rubber.
HEADS
In polycarbonate V0 colour RAL9016, self-extinguishing 850° C GW.
SCREEN
TS optic lamellar wedge in semi-gloss aluminium with micro perforated and satin-finished aluminium sleepers removable without any tools.
SCREEN CLOSING SYSTEM
Made with 4 fixing springs in harmonic steel retractable into the body. The optic is equipped with an anti-loss system that retains it during inspection or relamping.
LED MODULES
Light source modules of 32protected by PMMA cover with heads and locking clips. Efficiency 152 lm/W @ 350mA Tj = 25° C 4000° k. Net luminous flux 3300-4400 lm with efficiency up to 92 lm/W. Expected life 50,000 h L70. Colour rendering index Ra > 80
POWER UNIT
Drive current can be set to 350 ÷ 500mA with deep switch, power factor 0.95 220÷240V/50-60 Hz, lifetime 50,000 h @ Tc life.
Power terminal for quick insertion can be used without any tools.
Available upon request 1-10V dimmable solution, with DALI system or emergency.
SOLUTION WITH FLUORESCENT LAMPS
LAMPS
Available solutions for T8 fluorescent lamps 4x18W, 2x36W, 2x58W and T5 4x14W, 2×28-54W, 2×35-49-80W with symmetric optics for 1x58W T8 fluorescent lamp with asymmetric optics.
POWER UNIT
Electronic ballast for fluorescent lamps index EEI A3, power factor> 0.95 220 ÷ 240V / 50-60Hz, lifetime 50.000 @ Tc life.
Multipower driver for 2×28-54W and 2×35-49-80W versions. Power terminal for quick insertion can be used without any tools. Available upon request 1-10V dimmable solution, with DALI system or emergency.
